| Product characteristics |
| Laser protection class |
2 |
| Housing |
rectangular |
| Electrical data |
| Operating voltage [V] |
18...30 DC |
| Current consumption [mA] |
< 150 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Typ. lifetime [h] |
50000 |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analog outputs: 1 |
| Outputs |
| Total number of outputs |
2 |
| Electrical design |
PNP |
| Number of digital outputs |
2 |
| Output function |
normally open / closed; (programmable) |
| Max. current load per output [mA] |
200 |
| Number of analog outputs |
1 |
| Analog current output [mA] |
4...20; (scalable IEC 61131-2) |
| Max. load [Ω] |
250 |
| Analog voltage output [V] |
0...10; (scalable IEC 61131-2) |
| Min. load resistance [Ω] |
5000 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Overload protection |
yes |
| Monitoring range |
| Max. light spot width [mm] |
150 |
| Max. light spot height [mm] |
150 |
| Light spot dimensions refer to |
75 m |
| Background suppression [m] |
75...150 |
| Measuring/setting range |
| Measuring range [m] |
1...75; (Reflector E21159) |
| Sampling rate [Hz] |
1...33 |
| Interfaces |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis |
| SIO mode |
yes |
| Required master port class |
A |
| Process data analog |
1 |
| Process data binary |
2 |
| Min. process cycle time [ms] |
6 |
| Supported DeviceIDs |
| Type of operation |
DeviceID |
| default |
810 |
|
| Operating conditions |
| Ambient temperature [°C] |
-10...60 |
| Protection |
IP 67 |
| Tests / approvals |
| EMC |
|
| Laser protection class |
2 |
| Notes on laser protection |
| Caution: |
Laser light |
| Power: |
<= 4,0 mW |
| Wave length: |
650 nm |
| pulse: |
1,3 ns |
| Do not stare into beam. |
|
| Avoid exposure to the laser light. |
|
| laser class: |
2 |
| |
EN / IEC60825-1:2007 |
| |
EN / IEC60825-1:2014 |
| |
Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007. |
|
| MTTF [years] |
106 |
| Mechanical data |
| Weight [g] |
312 |
| Housing |
rectangular |
| Dimensions [mm] |
59 x 42 x 52 |
| Material |
housing: diecast zinc; front lens: glass; LED window: PC |
| Lens alignment |
Side sensing |
| Displays / operating elements |
| Display |
| Switching status |
2 x LED, yellow |
| Power |
LED, green |
| Distance, programming |
alphanumeric display, 4-digit |
|
| Remarks |
| Remarks |
| cULus - Class 2 source required |
|
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
Connector: 1 x M12; coding: A |
| Other data |
| Parameter |
Setting range |
Factory setting |
| Uni |
m, feet |
m |
| OU1 |
Hno, Hnc, Fno, Fnc |
Hno |
| SP1 |
1.00...75.00 |
10.00 |
| nSP1 |
1.00...75.00 |
8.00 |
| FSP1 |
1.00...75.00 |
12.00 |
| OU2 |
Hno, Hnc, Fno, Fnc, I, U |
I |
| SP2 |
1.00...75.00 |
20.00 |
| nSP2 |
1.00...75.00 |
18.00 |
| FSP2 |
1.00...75.00 |
22.00 |
| ASP |
0...75.00 |
0 |
| AEP |
0...75.00 |
75.00 |
| rATE [Hz] |
1...33 |
15 |
| dS1 |
0...0.1...5 |
0 |
| dr1 |
0...0.1...5 |
0 |
| dS2 |
0...0.1...5 |
0 |
| dr2 |
0...0.1...5 |
0 |
| dFo |
0...0.1...5 |
0.2 |
| dIS |
d1...3; rd1...3; OFF |
d3 |
|
| Repeatability / Accuracy |
| |
Repeatability of the measured values |
Accuracy |
| 1...25 m |
± 15 mm |
± 35 mm |
| 30 m |
± 15 mm |
± 35 mm |
| 40 m |
± 15 mm |
± 35 mm |
| 50 m |
± 19 mm |
± 39 mm |
| 60 m |
± 27 mm |
± 47 mm |
| 70 m |
± 43 mm |
± 63 mm |
|
| Sampling rate |
|
| Reflector |
33 Hz |
|
| Repeatability / Accuracy |
| |
Repeatability of the measured values |
Accuracy |
| 1...75 m |
± 15 mm |
± 35 mm |
|
| Sampling rate |
|
| Reflector |
1 Hz |
| The values apply at |
|
| Extraneous light on the object |
< 100 klx |
| constant ambient conditions |
23 °C / 960 hPa |
| minimum power-on time in minutes |
10 |
|
